Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-20
[Quidway-acl-adv-3010] rule permit ip source 10.10.0.0 0.0.255.255
destination 225.1.0.0 0.0.255.255
[Quidway-acl-adv-3010] quit
[Quidway] multicast routing-enable
[Quidway] pim
[Quidway-pim] register-policy 3010
5.1.21 reset pim neighbor
Syntax
reset pim neighbor { all | { neighbor-address | interface interface-type
interface-number } * }
View
User view
Parameter
all: All PIM neighbors
neighbor-address: Specifies neighbor address.
interface interface-type interface-number: Specifies interface.
Description
Use the reset pim neighbor command to clear a PIM neighbor.
Related command: display pim neighbor.
Example
# Clear the PIM neighbor 25.5.4.3.
<Quidway> reset pim neighbor 25.5.4.3
5.1.22 reset pim routing-table
Syntax
reset pim routing-table { all | { group-address [ mask group-mask | mask-length
group-mask-length ] | source-address [ mask source-mask | mask-length
source-mask-length ] | { incoming-interface interface-type interface number | null } }
* }
View
User view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English