Huawei Quidway S8500 Series User Manual

Command Manual – PoE
Quidway S8500 Series Routing Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-7
[Quidway] undo poe max-power slot 3
1.1.8 poe mode
Syntax
poe mode { signal | spare | auto }
undo poe mode
View
Ethernet port view
Parameter
signal: The port supplies power through signal lines.
spare: The port supplies power through spare lines.
auto: The port supplies power in automatically selected mode.
Description
Use the poe mode command to configure the PoE mode on the current port.
Use the undo poe mode command to restore the default PoE mode on current port.
By default, the port adopts signal lines to supply power.
Caution:
Quidway S8500 series routing switches currently do not support the spare mode. If a
PD only supports the spare mode, a conversion will be needed.
Example
# Configure the PoE mode on current port to signal.
[Quidway-GigabitEthernet3/1/1] poe mode signal
1.1.9 poe priority
Syntax
poe priority { critical | high | low }
undo poe priority

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English