Huawei Quidway S8500 Series User Manual

Command Manual – PoE
Quidway S8500 Series Routing Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-8
View
Ethernet port view
Parameter
critical: Sets the port priority to critical (the highest).
high: Sets the port priority to high.
low: Sets the port priority to low.
Description
Use the poe priority command to set the PoE priority on a port.
Use the undo poe priority command to restore the default priority.
By default, the PoE priority on each port is low.
Caution:
When the PoE power of the switch is not enough to support all the port, the switch
supplies power to ports with higher priority, and powers down some ports with lower
priority.
Example
# Set the PoE priority of current port to critical.
[Quidway-GigabitEthernet3/1/1] poe priority critical
# Restore the default priority.
[Quidway-GigabitEthernet3/1/1] undo poe priority

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English