Huawei Quidway S8500 Series User Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-5
Vlan-interface2 1.1.1.1 80(www) 4.4.4.4 80(www) 6(tcp)
3
Vlan-interface2 2.2.2.2 53(dns) 3.3.3.3 53(dns) 17(udp)
3
Vlan-interface3 2.2.2.3 69(tftp) 4.4.4.5 69(tftp) 17(udp)
3
1.1.6 display nat statistics
Syntax
display nat statistics slot slotno
View
Any view
Parameter
slotno: Number of the slot in which the NAT service processor board currently
functioning resides.
Description
Use the display nat statistics command to display the statistics of the current NAT
information.
Example
# Display the statistics of the current NAT information.
<Quidway> display nat statistics slot 3
Running information in slot 3:
active PAT session table count in CPU:0
active PAT session table count in NP:1
active NO-PAT session table count:0
active SERVER session table count:3
the number of good packet in NP:0
the number of bad packet in NP:0
Table 1-1 Description on the filed of the display nat statistics slot command
Field Description
Running information in slot Slot information
active PAT session table count in
CPU
Number of NAPT entries in CPU
active PAT session table count in NP Number of NAPT entries in NP
active NO-PAT session table count Number of NAT entries in CPU

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English