Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-29
Network Mask Cost Status Used
------------- --------------- -------- ------------- --------
1.2.0.0 255.255.0.0 1 advertise Yes
2.3.0.0 255.255.0.0 16777215 advertise No
Table 3-14 Description of the fields of the display ospf abr-summary command
Fields Description
Network Destination network segment
Mask Mask
Cost Cost of summary route
Status information. Which can be:
not-Advertis
e
Summary route information to this network segment
will not be advertised
Status
advertise
Summary route information to this network segment
will be advertised
Status information. Which can be:
Yes
The configuration of summary route to this network
segment includes match route
Used
No
The configuration of summary route to this network
segment does not include match route
3.1.27 display ospf vlink
Syntax
display ospf [ process-id ] vlink
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf vlink command to view the information about OSPF virtual links.
Example
# View OSPF virtual links information.
<Quidway> display ospf vlink
To Next Page
Loading...
