EasyManuals Logo

Huawei Quidway S8500 Series User Manual

Huawei Quidway S8500 Series
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #891 background imageLoading...
Page #891 background image
Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-5
[Quidway] cut connection domain huawei163.net
2.1.5 display connection
Syntax
display connection [ access-type { dot1x | gcm } | domain domain-name | interface
interface-type interface-number | ip ip-address | mac mac-address | radius-scheme
radius-scheme-name | vlan vlanid | ucibindex ucib-index | user-name user-name ]
View
Any view
Parameter
access-type dot1x: Configures to display the user connections that are of the
specified access category.
dot1x: Specifies 802.1x access mode.
gcm: Specifies GCM access mode.
domain domain-name: Configures to display all the users in an ISP domain.
domain-name specifies the ISP domain name with a character string not exceeding 24
characters. The specified ISP domain shall have been created.
mac mac-address: Configures to display the supplicant whose MAC address is
mac-address. The argument mac-address is in the hexadecimal format (x-x-x).
radius-scheme radius-server-name: Configures to display the supplicant according to
RADIUS server name. radius-server-name specifies the RADIUS server name with a
character string not exceeding 32 characters.
interface interface-type interface-number: Configures to display the supplicant
according the port.
ip ip-address: Configures to display the user specified with IP address.
vlan vlanid: Configures to display the user specified with VLAN ID. Here, vlanid ranges
from 1 to 4094.
ucibindex ucib-index: Configures to display the user specified with ucib-index. Here,
ucib-index ranges from 0 to 2311.
user-name user-name: Configures to display a user specifies with user-name.
user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding “/”, “:”, “*”, “?”, “<” and “>”. The @ character can
only be used once in one username. The pure username (the part before @, namely
the user ID) cannot exceed 24 characters.

Table of Contents

Other manuals for Huawei Quidway S8500 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S8500 Series and is the answer not in the manual?

Huawei Quidway S8500 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S8500 Series
CategorySwitch
LanguageEnglish

Related product manuals