Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-17
Example
# Set RPR port type to 10GE.
<Quidway> system-view
[Quidway] interface RPRPOS 3/1/1
[Quidway-RPRPOS 3/1/1]port-type 10ge
4.1.14 reset counters interface
Syntax
reset counters interface [ interface-type ] interface-number
View
User view
Parameter
interface-type: Interface type.
interface-number: Port number, in the format of slot number/card number/port number.
The port includes RPRPOS logical port and physical port.
Description
Use the reset counters interface command to clear port statistics to implement
statistics of related information on the port..
Example
# Clear RPRPOS logical port RPR2/1/1 statistics.
<Quidway> reset counters interface RPR2/1/1
# Clear RPR physical port RPR 2/1/1.1 statistics.
<Quidway> reset counters interface RPR 2/1/1.1
4.1.15 rpr admin-request
Syntax
rpr admin-request { fs | ms | idle } { ringlet0 | ringlet1 }
View
RPR logical port view
Parameter
fs: Forced switchover.
ms: Manual switchover.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English