Huawei Quidway S8500 Series - Lacp Port-Priority

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-9
View
Ethernet port view
Parameter
None
Description
Use the lacp enable command to enable LACP.
Use the undo lacp enable command to disable LACP.
Example
# Enable LACP for Ethernet port Ethernet1/1/1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/1/1
[Quidway-Ethernet1/1/1] lacp enable
2.1.10 lacp port-priority
Syntax
lacp port-priority port-priority-value
undo lacp port-priority
View
Ethernet port view
Parameter
port-priority-value: Port priority, in the range of 0 to 65,535. By default, it is 32,768.
Description
Use the lacp port-priority command to configure port priority.
Use the undo lacp port-priority command to restore the default port priority.
Related command: display link-aggregation verbose and display link-aggregation
interface.
Example
# Set port priority to 64.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/1/1