Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches
Chapter 2 Ethernet Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
2-8
Note that since the manual aggregation group cannot get the information of the peer
end, every item of the peer end is displayed as 0, which does not indicate the actual
status of the peer system.
Example
# Display detailed link aggregation information of link aggregation group.
<Quidway> display link-aggregation interface ethernet2/1/1
Ethernet2/1/1:
Attached AggID: 1
Local:
Port-Priority: 32768, Oper key: 1, Flag: 0x00
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0, Oper-key: 0, Flag: 0x00
Received LACP Packets: 0 packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Table 2-4 Description on the fields of the display link-aggregation interface
command
Field Description
Attached AggID
Aggregation group ID for the specified
port
Local:
Port-Priority: 32768, Oper key: 1,
Flag: 0x00
Port priority, operation key, LACP state
flag of the local end
Remote:
System ID: 0x0, 0000-0000-0000
Port Number: 0, Port-Priority: 0,
Oper-key: 0, Flag: 0x00
Device ID, port priority, operation key,
LACP state flag of the remote end
Received LACP Packets: 0 packet(s),
Illegal: 0 packet(s)
Received LACP packets
Sent LACP Packets: 0 packet(s) Sent LACP packets
2.1.9 lacp enable
Syntax
lacp enable
undo lacp enable

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English