Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-30
Parameter
protocol: Specifies source routing protocols which can be imported, which include
direct, ospf, ospf-nssa , ospf-ase, rip, isis and static at present.
med med-value: Specifies the MED value loaded by an imported route, ranging from 0
to 4294967295.
route-policy route-policy-name: Specifies a route-policy used for filtering imported
routes of other protocols. It can consist of numbers and letters with a length ranging
from 1 to 19.
Description
Use the import-route command to import routes of other protocols.
Use the undo import-route command to cancel importing routes of other protocols.
By default, BGP does not import routes of other protocols.
Example
# Import routes of RIP.
[Quidway-bgp] import-route rip
5.1.31 network
Syntax
network ip-address [ address-mask ] [ route-policy route-policy-name ]
undo network ip-address [ address-mask ] [ route-policy route-policy-name ]
View
BGP view
Parameter
ip-address: Network address that BGP advertises.
address-mask: Mask of the network address.
route-policy-name: Route-policy applied to advertised routes.
Description
Use the network command to configure the network routes advertised by the local
BGP.
Use the undo network command to cancel the existing configuration.
By default, the local BGP does not advertise any routes.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English