Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-27
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] preference 170 170 170
7.1.38 reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
IPv4 multicast sub-address family view
Parameter
None
Description
Use the reflect between-clients command to enable route reflection between clients.
Use the undo reflect between-clients command to disable route reflection between
clients.
When configured, the route reflector can reflect routes of a client to other clients.
By default, all-connection is not required for the clients with route reflectors configured,
since the routes are by default reflected from one client to others. For all-connection
clients, route reflection is unnecessary.
Related command: reflector cluster-id and peer reflect-client.
Example
# Disable route reflection function.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] undo reflect between-clients
7.1.39 refresh bgp multicast
Syntax
refresh bgp { all | peer-address | group group-name } multicast { import | export }
View
User view
To Next Page
Loading...
Need help?
General