Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-13
4.1.13 filter-policy import
Syntax
filter-policy acl-number import
undo filter-policy acl-number import
View
IS-IS view
Parameter
acl-number: Specifies the number of the access control list, ranging from 2000 to 3999.
Description
Use the filter-policy import command to configure to filter the routes received by IS-IS.
Use the undo filter-policy import command to configure not to filter the received
routes.
By default, IS-IS does not filter the received routing information.
In some cases, only the routing information meeting the specified conditions will be
accepted. You can configure the filter-policy to specify the filter conditions so as to
accept the desired routing information only.
Related command: filter-policy export.
Example
# Filter the received routes by using ACL 2000.
[Quidway-isis] filter-policy 2000 import
4.1.14 ignore-lsp-checksum-error
Syntax
ignore-lsp-checksum-error
undo ignore-lsp-checksum-error
View
IS-IS view
Parameter
None