Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 3 POS Port Configuration Commands
Huawei Technologies Proprietary
3-12
3.1.13 reset counters interface pos
Syntax
reset counters interface pos [ interface-number ]
View
User view
Parameter
interface-number: POS port number, in the format of board slot ID/daughter card slot
ID/ port ID, where board slot ID refers to the ID of the slot for LPU, in the range of 2 to 6
(for S8505), or 0 to 3 and 6 to 9 (for S8508), or 0 to 5 and 8 to 13 (for S8512); daughter
card slot ID refers to the ID of the slot for daughter, with the value of 1; port ID refers to
the sequence number on the LPU for the port, in the range of 1 to 4.
Description
Use the reset counters interface pos command to clear statistics about the POS port,
to recollect statistics about the port. If no port number is specified, the command clears
statistics about all POS ports.
Example
# Clear statistics about POS2/1/1.
<Quidway> reset counters interface pos 2/1/1
3.1.14 scramble
Syntax
scramble
undo scramble
View
POS port view
Description
Use the scramble command to enable scrambling function at the POS port.
Use the undo scramble command to disable scrambling function at the POS port.
By default, scrambling function is enabled at a POS port.
Example
# Enable scrambling function at POS2/1/1.
<Quidway> system-view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English