Huawei Quidway S8500 Series User Manual

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-18
Example
# Set the active time of a connection after which a NAT log record is created to 30
minutes.
[Quidway] ip userlog nat active-time 30
1.2.4 ip userlog nat export host
Syntax
ip userlog nat export host ip-address udp-port
undo ip userlog nat export host
View
System view
Parameter
ip-address: IP address of the log server, that is, the destination IP address for log
packets.
udp-port: UDP port number of the log server, that is, the destination port number for log
packets. The valid range is from 0 to 65,535. By default, it is 0.
Description
Use the ip userlog nat export host command to set the address and port number of
the destination server of log packets.
Use the undo ip userlog nat export host command to remove the configuration.
Example
# Set the destination address and UDP port number of log packets to 169.254.1.1 and
200 respectively.
[Quidway] ip userlog nat export host 169.254.1.1 200
1.2.5 ip userlog nat export source-ip
Syntax
ip userlog nat export source-ip src-address
undo ip userlog nat export source-ip
View
System view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English