Huawei Quidway S8500 Series User Manual

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-12
about one specific VLAN (with vlan-id parameter) or all VLANs (without vlan-id
parameter) on the switch.
Example
# Display all the QoS parameter configurations of all the VLANs.
<Quidway> display qos-vlan all
Vlan 1 traffic-limit
Inbound:
There is no configuration.
Vlan 1 traffic-priority
Inbound:
There is no configuration.
Vlan 1 traffic-redirect
Inbound:
There is no configuration.
Vlan 2 traffic-limit
Inbound:
Matches: Acl 2000 rule 1 running
Committed Information Rate: 8192 Kbps
Committed Burst Size: 10000 byte(s)
Excess Burst Size: 20000 byte(s)
Peak Information Rate: 0 Kbps
Exceed action: drop
Vlan 2 traffic-priority
Inbound:
Matches: Acl 2000 rule 1 running
Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6,
local
-precedence: 6, drop-priority: 1
Vlan 2 traffic-redirect
Inbound:
Matches: Acl 2000 rule 1 running
Redirected to: next-hop 1.1.1.1
2.1.15 display qos-vlan traffic-limit
Syntax
display qos-vlan [ vlan-id ] traffic-limit
View
Any view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English