Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-8
Example
# Set the priority level of clock source 2 to 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]clock priority 2 source 2
4.2.5 clock sa-bit
Syntax
clock sa-bit { sa4 | sa5 | sa6 | sa7 | sa8 } source source
View
System view
Parameter
source: Numer of the Bits clock source, ranging from 1 to 2.
sa4: Time slot of sa4 bit.
sa5: Time slot of sa5 bit.
sa6: Time slot of sa6 bit.
sa7: Time slot of sa7 bit.
sa8: Time slot of sa8 bit.
Description
Use the clock sa-bit command to set the time slot of a Bits clock source. sa4 through
sa8 refer to the five bits, sa4 through sa8, of CRC4 CRC4 multiple-frame even-frame
slot 0, one of which can be selected by the carrier to carry the SSM information
according to ITU-T G.704.
Example
# Set the time slot of Bits clock source 1 to SA4.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] clock sa-bit sa4 source 1
4.2.6 clock ssm
Syntax
clock ssm
{ dnu | lnc | prc | sets | tnc | unknown } source source

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English