Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 IGMP Configuration Commands
4.1 IGMP Configuration Commands
4.1.1 debugging igmp
Syntax
debugging igmp { all | event | host | packet | timer }
undo debugging igmp { all | event | host | packet | timer }
View
User view
Parameter
all: All the debugging information of IGMP.
event: Debugging information of IGMP event.
host: Debugging information of IGMP host.
packet: Debugging information of IGMP packets.
timer: Debugging information of IGMP timers.
Description
Use the debugging igmp command to enable IGMP debugging functions.
Use the undo debugging igmp command to disable the debugging functions.
By default, IGMP debugging functions are disabled.
Example
# Enable all IGMP debugging functions
<Quidway> debugging igmp all
4.1.2 display igmp group
Syntax
display igmp group [ group-address | interface vlan-interface interface-number ]
View
Any view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English