Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-10
network-address: IP address of the destination network.
mask: Mask of the destination network.
statistic: Displays statistic information of the route.
Description
Use the display bgp multicast routing-table peer command to view the routes
received/advertised at/to the specified peer.
Example
# Display routing information advertised to the peer 10.10.1.11.
<Quidway> display bgp multicast routing-table peer 10.10.1.11 advertised
7.1.16 display bgp multicast routing-table regular-expression
Syntax
display bgp multicast routing-table regular-expression as-regular-expression
View
Any view
Parameter
as-regular-expression: AS regular expression matched.
Description
Use the display bgp multicast routing-table regular-expression command to view
the routing information matching the specified AS regular expression.
Example
# Display routing information matching AS regular expression ^600$.
<Quidway> display bgp multicast routing-table regular-expression ^600$
7.1.17 filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol ]
View
IPv4 multicast sub-address family view

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English