Huawei Quidway S8500 Series - Ip Address

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 1 IP Address Configuration Commands
Huawei Technologies Proprietary
1-3
Table 1-2 Description on the fields of the display ip interface command
Field Description
Vlan-interface1 current state Current state of the VLAN interface 1
Line protocol current state Current state of the Line protocol
Internet Address IP address
Broadcast address Broadcast address
The Maximum Transmit Unit Maximum transmission unit
input packets : 0, bytes : 0, multicasts : 0
output packets : 0, bytes : 0, multicasts :
0
The number of the input/output unicast
packets, bytes and broadcast packets
are all 0
TTL invalid packet number
The number of the received packets with
invalid TTLs
ICMP packet input number
Echo reply:
Unreachable:
Source quench:
Routing redirect:
Echo request:
Router advert:
Router solicit:
Time exceed:
IP header bad:
Timestamp request:
Timestamp reply:
Information request:
Information reply:
Netmask request:
Netmask reply:
Unknown type:
Total received ICMP packets, including:
Echo reply packets, unreachable
packets, source quench packets, routing
redirect packets, echo request packets,
route advertisement packets, route
solicitation packets, packets that exceed
the time, packets with bad IP headers,
timestamp request packets, timestamp
reply packets, information request
packets, information reply packets,
netmask request packets, netmask reply
packets and unknown packets.
DHCP packet deal mode DHCP packet processing mode
1.1.3 ip address
Syntax
ip address ip-address { mask | mask-length } [ sub ]
undo ip address [ ip-address { mask | mask-length } [ sub ] ]