Huawei Quidway S8500 Series - Pim DM

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-15
Caution:
The pim bsr-boundary command cannot build a multicast boundary. It just sets up a
PIM bootstrap message boundary.
Related command: c-bsr.
Example
# Configure domain border on VLAN-interface10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface vlan-interface 10
[Quidway-Vlan-interface10] pim bsr-boundary
5.1.15 pim dm
Syntax
pim dm
undo pim dm
View
VLAN interface view
Parameter
None
Description
Use the pim dm command to enable PIM-DM.
Use the undo pim dm command to disable PIM-DM.
By default, PIM-DM is disabled.
Before enabling PIM-DM, you must execute the multicast routing-enable command
in system view to enable the multicast routing first.
Example
# Enable PIM-DM on VLAN-interface10 of the Ethernet switch.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] multicast routing-enable
[Quidway]interface vlan-interface 10