Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches
Chapter 7 MBGP Multicast Extension
Configuration Commands
Huawei Technologies Proprietary
7-18
View
IPv4 multicast sub-address family view
Parameter
group-name: Name of the multicast peer group.
Description
Use the peer enable command to enable the MBGP peer group.
Use the undo peer enable command to disable the MBGP peer group.
By default, the MBGP peer group is disabled.
Only after the peer group is enabled, can the router establishes connection with the
multicast peer.
Example
# Enable peer group group1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] bgp 100
[Quidway-bgp] ipv4-family multicast
[Quidway-bgp-af-mul] peer group1 enable
7.1.27 peer filter-policy export
Syntax
peer group-name filter-policy acl-number export
undo peer group-name filter-policy acl-number export
View
IPv4 multicast sub-address family view
Parameter
group-name: Specifies the name of the peer group.
acl-number: Specifies an IP acl number, ranging from 2000 to 3999. That is, you can
use basic ACLs or advanced ACLs.
export: Applies the filter policy to the advertised routes. This keyword is only valid for
the peer groups.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English