Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-8
Description
Use the ntp-service broadcast-server command to configure NTP broadcast server
mode.
Use the undo ntp-service broadcast-server command to disable the NTP broadcast
server mode.
By default, the broadcast service is disabled and number defaults to 3.
Designate an interface on the local equipment to broadcast NTP packets. The local
equipment runs in broadcast-server mode and regularly broadcasts packets to its
clients.
Example
# Configure to broadcast NTP packets through Vlan-Interface1, encrypt them with Key
4, and set the NTP version number as 3.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface vlan-interface1
[Quidway-Vlan-interface1] ntp-service broadcast-server authentication-key 4
version 3
7.1.10 ntp-service max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view
Parameter
number: The maximum SESSIONS can be created locally, ranging from 0 to 100.
Description
Use the ntp-service max-dynamic-sessions command to set how many SESSIONS
can be created locally.
Use the undo ntp-service max-dynamic-sessions command to resume the default
maximum SESSIONS number
By default, a local device allows up to 100 SESSIONS.
Example
# Set the local equipment to allow up to 50 SESSIONS.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English