Huawei Quidway S8500 Series - Display Rip Vpn-Instance

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-11
Table 2-3 Description of command information on display
Field Description
NO Number
FEC Forwarding equivalent class
NEXTHOP Next hop
OUTER-LABEL Outer label (MPLS Tunneling Label)
OUT-INTERFACE Egress interface
# Display MPLS L3VPN egress lsp information on PE
<Quidway> display mpls l3vpn-lsp egress
---------------------- -------------------------------------------------
LSP Information: L3vpn Egress Lsp
-----------------------------------------------------------------------
NO VRFNAME INNER-LABEL NEXTHOP OUT-INTERFACE
1 vpna 4096 0.0.0.0 InLoop0
TOTAL: 1 Record(s) Found.
Table 2-4 Description of command information on display
Field Description
NO Number
VRFNAME Name of VPN Instance
INNER-LABEL Inner label (VPN label)
NEXTHOP Next hop
OUT-INTERFACE Egress interface
2.1.12 display rip vpn-instance
Syntax
display rip vpn-instance vpn-instance-name
View
Any view
Parameter
vpn-instance vpn-instance-name: Specifies a VPN instance name.