Huawei Quidway S8500 Series - Jumboframe Enable

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-12
Example
# Enter the Ethernet2/1/1 port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet2/1/1
1.1.12 jumboframe enable
Syntax
jumboframe enable [ jumboframe-value ] slot slot-num
undo jumboframe enable
View
System view
Parameter
slot-num: Specifies the slot number of the card.
jumboframe-value: specifies the maximum size of jumbo frames permitted to pass the
card..
Description
Use the jumboframe enable command to permit jumbo frames to pass the card on the
specified slot and set the maximum size of Jumbo frames.
Use the jumboframe disable slot command to prohibit jumbo frames from passing the
card on the specified slot.
By default, jumbo frame is permitted to pass cards.
Related command: display jumboframe configuration.
 Note:
The system supports discrete values of Jumbo frame lengths ranging from 1536 to
10240. However, effective Jumbo frame values fall into several sections: the effective
Jumbo frame value for the 1536-1552 section is 1552, that for the 1552-9022 section is
9022, that for the 9022-9122 section is 9122, and that for the 9122-10240 section is
10240.