Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-17
Example
# Configure the default VLAN of the hybrid port Ethernet2/1/1 to 100.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet2/1/1
[Quidway-Ethernet2/1/1] port hybrid pvid vlan 100
1.1.18 port hybrid vlan
Syntax
port hybrid vlan vlan-id-list { tagged | untagged }
undo port hybrid vlan vlan-id-list
View
Ethernet port view
Parameter
vlan-id-list: vlan-id-list = [ vlan-id1 [ to vlan-id2 ] ]&<1-10>: Specifies which VLAN the
hybrid port will be added to. It can be discrete. The vlan-id ranges from 1 to 4,094.
&<1-10> indicates that the former parameter can be input 10 times repeatedly at most.
tagged: Packet of specified VLAN will have tag.
untagged: Packet of specified VLAN will not have tag.
Description
Use the port hybrid vlan command to join the hybrid port to specified existing VLAN.
Use the undo port hybrid vlan command to cancel the hybrid port from the specified
VLAN.
Hybrid port can belong to multiple VLANs. If the port hybrid vlan vlan-id-list { tagged |
untagged } command is used for many times, the VLANs carried by the hybrid port is
the set of vlan-id-list.
This command can be used on condition that the VLAN specified with vlan-id must
have been existed.
Related command: port link-type.
Example
# Join hybrid port Ethernet2/1/1 to VLAN of 2, 4 and 50-100, and these VLAN will have
tags.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet2/1/1
To Next Page
Loading...
Need help?
General