Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 3 POS Port Configuration Commands
Huawei Technologies Proprietary
3-2
Parameter
16: CRC checkbit is 16 bits.
32: CRC checkbit is 32 bits.
Description
Use the crc command to define CRC checkbit length at the POS port.
Use the undo crc command to restore the default CRC checkbit length at the POS
port.
By default, the CRC checkbit is 32 bits.
Note that a 10GPOS port does not support 16-bit CRC.
Example
# Set CRC checkbit length at POS2/1/1 as 16.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface pos2/1/1
[Quidway-Pos2/1/1] crc 16
3.1.3 description
Syntax
description text
undo description
View
POS port view
Parameter
text: Port description string, 64 characters at most.
Description
Use the description command to set port description string.
Use the undo description command to delete the port description string.
By default, the description string for a POS port is null.
Example
# Set the description string of POS2/1/1 to “Pos-interface”.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English