Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-54
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Specifies the channel name.
Description
Use the info-center trapbuffer command to output information to the trap buffer.
Use the undo info-center trapbuffer command to cancel output information to trap
buffer.
By default, output information is transmitted to trap buffer and size of trap buffer is 256.
This command takes effect only after the system logging is enabled.
The information can be output to the trap buffer by configuring the size of the buffer.
Related command: info-center enable, display info-center.
Example
# Send information to the trap buffer and sets the size of buffer as 30.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center trapbuffer size 30
4.6.18 reset logbuffer
Syntax
reset logbuffer
View
User view
Parameter
None
Description
Use the reset logbuffer command to reset information in log buffer.
Example
# Clear information in log buffer.
<Quidway> reset logbuffer

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English