Huawei Quidway S8500 Series User Manual

Command Manual – Multicast Protocol
Quidway S8500 Series Routing Switches Chapter 3 Multicast Common Configuration Commands
Huawei Technologies Proprietary
3-1
Chapter 3 Multicast Common Configuration
Commands
3.1 Multicast Common Configuration Commands
3.1.1 broadcast-suppression
Syntax
broadcast-suppression { ratio | bandwidth bandwidth }
undo broadcast-suppression
View
Ethernet port view
Parameter
ratio: Specifies the maximum wire speed ratio of the broadcast traffic allowed on the
port. The value range is 1 to 100, and the default value is 50. The smaller the ratio is,
the smaller the broadcast traffic is allowed to pass.
bandwidth: Specifies broadcast suppression bandwidth on the port. The value range is
1 to the maximum value of port bandwidth.
Description
Use the broadcast-suppression command to set the broadcast suppression ratio or
broadcast suppression bandwidth.
Use the undo broadcast-suppression command to disable the broadcast
suppression function.
The default broadcast suppression ratio is 50%.
You can use the broadcast-suppression command repeatedly. The effective
broadcast suppression ratio value is the one last updated.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English