Huawei Quidway S8500 Series User Manual

Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 5 SNMP Configuration Commands
Huawei Technologies Proprietary
5-8
5.1.7 display snmp-agent usm-user
Syntax
display snmp-agent usm-user [ engineid engineid | group groupname | username
username ]*
View
Any view
Parameter
engineid: Displays user information with specified engine ID.
username: Displays user information with specified user name.
groupname: Displays user information of specified group.
Description
Use the display snmp-agent usm-user command to view information of all the SNMP
usernames in the group username list.
SNMP user is the remote user executing SNMP administrative operation. You can use
the snmp-agent usm-user command to specify the SNMP user.
Example
# Display the information of all the current users.
<Quidway> display snmp-agent usm-user
User name: NotifyV3
Group name: NotifyGroup
Authencation Mode: sha
Privacy Mode: des
Engine ID: 800007DB00E0FC2085026877 active
User name: publicV3
Group name: groupV3
Authencation Mode: no
Privacy Mode: no
Engine ID: 800007DB00E0FC2085026877 active
Acl:2000
The following table describes the output fields.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English