Command Manual – System Management
Quidway S8500 Series Routing Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-34
View
User view
Parameter
ipaddress: IP address of the remote FTP Server.
port: Port number of remote FTP Server.
Description
Use the ftp command to establish control connection with the remote FTP Server and
enter FTP Client view.
Example
# Connect to FTP Server at the IP address 1.1.1.1
<Quidway> ftp 1.1.1.1
1.4.12 get
Syntax
get remotefile [ localfile ]
View
FTP Client view
Parameter
localfile: Local file name.
remotefile: Name of a file on the remote FTP Server.
Description
Use the get command to download a remote file and save it locally.
If no local file name is specified, it will be considered the same as that on the remote
FTP Server.
Example
# Download the file temp1.c and saves it as temp.c
<Quidway> ftp
[ftp] get temp1.c temp.c
To Next Page
Loading...
