Huawei Quidway S8500 Series - Chapter 3 BPDU Tunnel Configuration Commands

Command Manual – STP
Quidway S8500 Series Routing Switches Chapter 3
BPDU Tunnel Configuration Commands
Huawei Technologies Proprietary
3-1
Chapter 3 BPDU Tunnel Configuration Commands
3.1 BPDU Tunnel Configuration Commands
3.1.1 vlan-vpn enable
Syntax
vlan-vpn enable
undo vlan-vpn
View
Ethernet port view
Parameter
None
Description
Use the command vlan-vpn enable to enable VLAN VPN (QinQ) on the port.
Use the undo vlan-vpn command to disable VLAN VPN (QinQ) on the port.
By default, VLAN VPN is disabled on all the ports.
Example
# Enable VLAN VPN on the switch.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet3/1/3
[Quidway-Ethernet3/1/3]vlan-vpn enable
3.1.2 vlan-vpn tunnel
Syntax
vlan-vpn tunnel
undo vlan-vpn tunnel
View
System view