Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-28
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
Table 3-13 Description of the fields of the display ospf routing command
Field Description
Destination Destination network segment
Cost Cost of route
Type Type of route
NextHop Next hop of route
AdvRouter Router ID of the router advertising the route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
ASE Number of external routes
NSSA Number of NSSA routes
3.1.26 display ospf abr-summary
Syntax
display ospf [ process-id ] abr-summary
View
Any view
Parameter
process-id: OSPF process number. If no process number is specified, the command
functions on all the currently active OSPF processes.
Description
Use the display ospf abr-summary command to view the inter-area route
summarization information of OSPF.
Related command: abr-summary.
Example
# View all the imported route summarization information of OSPF.
<Quidway> display ospf abr-summary
OSPF Process 1 with Router ID 1.1.1.1
ABR summary in area 0.0.0.1, total 2: