Huawei Quidway S8500 Series User Manual

Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-32
number: Specifies the repeating times of local AS, ranging from 1 to 10.
Description
Use the peer allow-as-loop command to configure the repeating time of local AS.
Use the undo peer allow-as-loop command to remove the repeating time of local AS.
Related command: display current-configuration, display bgp routing-table peer,
display bgp routing-table group.
Example
# Specify to configure the repeating times of local AS to 2.
[Quidway-bgp] peer 1.1.1.1 allow-as-loop 2
5.1.34 peer as-number
Syntax
peer group-name as-number as-number
undo peer group-name as-number
View
BGP view
Parameter
group-name: Name of peer group.
as-number: Peer AS number of the peer group, the range is 1 to 65535.
Description
Use the peer as-number command to configure the peer AS number of the specified
peer group.
Use the undo peer as-number command to delete the peer AS number of the
specified peer group.
By default, no peer AS number of the specified peer group is configured.
Example
# Specify the peer AS number for the peer group test as 100.
[Quidway-bgp] peer test as-number 100
5.1.35 peer as-path-acl export
Syntax
peer group-name as-path-acl acl-number export

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English