Huawei Quidway S8500 Series - Display Qos-Vlan Traffic-Redirect; Display Traffic-Params

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-14
Example
# Display the priority marking configuration.
<Quidway> display qos-vlan traffic-priority
Vlan 1 traffic-priority
Inbound:
There is no configuration.
Vlan 2 traffic-priority
Inbound:
Matches: Acl 2000 rule 1 running
Priority action: remark-policed-service, untrusted, dscp: 13, cos: 6,
local-precedence: 6, drop-priority: 1
2.1.17 display qos-vlan traffic-redirect
Syntax
display qos-vlan [ vlan-id ] traffic-redirect
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan traffic-redirect command to display the parameter
configuration for traffic redirection, including the related ACL and the destination port of
the traffic redirection.
Related command: traffic-redirect.
Example
# Display the parameter configuration for a traffic redirection.
<Quidway> display qos-vlan 2 traffic-redirect
Vlan 2 traffic-redirect
Inbound:
Matches: Acl 2000 rule 1 running
Redirected to: next-hop 1.1.1.1
2.1.18 display traffic-params
Syntax
display traffic-params [ traffic-index ]