Huawei Quidway S8500 Series - Display Stop-Accounting-Buffer

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-29
PKT response ,Num=0 ,Err=0 ,Succ=0
EAP reauth_request ,Num=0 ,Err=0 ,Succ=0
PORTAL access ,Num=0 ,Err=0 ,Succ=0
Update ack ,Num=0 ,Err=0 ,Succ=0
PORTAL access ack ,Num=0 ,Err=0 ,Succ=0
Session ctrl pkt ,Num=0 ,Err=0 ,Succ=0
RADIUS send messages statistic:
Normal auth accept ,Num=0
Normal auth reject ,Num=0
EAP auth accept ,Num=0
EAP auth reject ,Num=0
EAP auth replying ,Num=0
EAP reauth accept ,Num=0
EAP_reauth_reject ,Num=0
Account success ,Num=0
Account failure ,Num=0
Account off ack ,Num=0
Update request ,Num=0
Leaving ack ,Num=0
Cut req ,Num=0
RecError_MSG_sum:0 SndMSG_Fail_sum :0
Timer_Err :0 Alloc_Mem_Err :0
State Mismatch :0 Other_Error :0
No-response-acct-stop packet=0
Discarded No-response-acct-stop packet=0
2.2.8 display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View
Any view
Parameter
radius-scheme radius-server-name: Configures to display the saved stopping
accounting requests according to RADIUS scheme name. radius-server-name
specifies the RADIUS scheme name with a character string not exceeding 32
characters.