Huawei Quidway S8500 Series - Vlan-Vpn Enable

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-23
Example
# Configure Ethernet port Ethernet2/1/1 port speed as 100 Mbps.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] speed 100
1.1.26 vlan-vpn enable
Syntax
vlan-vpn enable
undo vlan-vpn
View
Ethernet port view
Parameter
None
Description
Use the vlan-vpn enable command to enable port VLAN VPN.
Use the undo vlan-vpn command to disable port VLAN VPN.
Note that if anyone of GVRP, STP, NTP or 802.1x has been enabled on a port, VLAN
VPN cannot be enabled on it.
By default, the port VLAN VPN is disabled.
Example
# Enable VLAN VPN on Ethernet2/1/1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet2/1/1
[Quidway-Ethernet2/1/1] vlan-vpn enable