Huawei Quidway S8500 Series - Debugging Arp

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-5
System view
Parameter
aging-time: Aging time of dynamic ARP aging timer, which is in the range of 1 to 1440
minutes. By default, the aging time is 20 minutes.
Description
Use the arp timer aging command to configure the dynamic ARP aging timer.
Use the undo arp timer aging command to restore the default dynamic ARP aging
timer.
Related command: display arp timer aging.
Example
# Configure the dynamic ARP aging timer to 10 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] arp timer aging 10
2.1.5 debugging arp
Syntax
debugging arp { error | info | packet }
undo debugging arp { error | info | packet }
View
User view
Parameter
error: ARP error debugging.
info: ARP mapping table and information management debugging.
packet: ARP packet debugging.
Description
Use the debugging arp command to enable ARP debugging.
Use the undo debugging arp command to disable the corresponding ARP debugging.
By default, no ARP debugging is enabled.
Related command: arp static, display arp.
Example
# Enable ARP packet debugging.