Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 3 ARP Table Size Configuration Commands
Huawei Technologies Proprietary
3-2
3.1.2 arp max-aggregation-entry
Syntax
arp max-aggregation-entry max-aggnum
undo arp max-aggregation-entry
View
System view
Parameter
max-aggnum: Maximum number of ARP entries for aggregation port (that is,
aggregation ARP entries) supported by each card. This argument counts in K (1K =
1024).
Description
Use the arp max-aggregation-entry command to configure the maximum number of
aggregation ARP entries that can be supported by each card of the switch.
Use the undo arp max-aggregation-entry command to restore the default maximum
number of aggregation ARP entries supported by each card.
If the system does not contain cards whose model name are suffixed with B, DA, DB or
DC, you can configure the maximum number of aggregation ARP entries to 0K, 1K, 3K,
7K or 8K. Otherwise, you can only configure the maximum number to 0K, 1K or 3K.
By default, each card supports up to 1K aggregation ARP entries.
Example
# Configure the maximum number of aggregation ARP entries that can be supported by
each card of the switch to 8K (assuming that the system does not contain cards whose
model name are suffixed with B, DA, DB or DC).
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]arp max-aggregation-entry 8
The configuration won't be enables until the system is rebooted.
3.1.3 arp enable size
Syntax
arp enable size { 4 | 64 }
undo arp enable size

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English