Command Manual – Routing Protocol
Quidway S8500 Series Routing Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-27
Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1
Table 3-12 Description of the fields of the display ospf retrans-queue command
Field Description
RouterID Router ID of neighbor router
Address
Address of the interface, through which neighbor routers
communicate with the router
Interface Address of the interface on the network segment
Area Number of an OSPF area
Type Type of the LSA
LSID Link State ID of the LSA
AdvRouter Router ID of the router originating the LSA
3.1.25 display ospf routing
Syntax
display ospf [ process-id ] routing
View
Any view
Parameter
process-id: ID of an OSPF process. The command is applied to all current OSPF
processes if you do not specify a process ID.
Description
Use the display ospf routing command to view information about the OSPF routing
table.
Example
# View the OSPF routing table.
<Quidway> display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0/16 1 Net 10.110.10.1 1.1.1.1 0
10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0
Total Nets: 2
To Next Page
Loading...
Need help?
General