Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-2
Caution:
z You cannot enable both broadcast suppression and multicast suppression
simultaneously on the same card. Namely, once you have enabled broadcast
suppression on some ports of a card, you cannot enable multicast suppression on
the other ports of the card, and vice versa.
z If multicast suppression is enabled, broadcast packets are also suppressed at the
same time, while broadcast suppression does not work on multicast packets.
z No distinction is made between known multicast and unknown multicast for
multicast suppression.
Related command: multicast-suppression.
Example
# Set the broadcast suppression ratio to 40.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 2/1/1
[Quidway-Ethernet2/1/1] broadcast-suppression 40
# Set the broadcast suppression bandwidth to 40Mbit.
[Quidway-Ethernet2/1/1] broadcast-suppression bandwidth 40
# Disable broadcast suppression.
[Quidway-Ethernet2/1/1] undo broadcast-suppression
1.1.2 copy configuration
Syntax
copy configuration source { interface-type interface-number | interface-name |
aggregation-group agg-id } destination { interface-list [ aggregation-group agg-id ] |
aggregation-group agg-id }
View
System view
Parameter
interface-type: Source port type.
interface-number: Source port number.
To Next Page
Loading...
Need help?
General