Huawei Quidway S8500 Series - Display Radius

Command Manual – Security
Quidway S8500 Series Routing Switches
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
Huawei Technologies Proprietary
2-25
Parameter
None
Description
Use the display local-server statistics command to view the statistics of local
RADIUS scheme.
Use the display local-server nas-ip command to view the Nas-ip that is allowed to
access the Local-server.
Related command: local-server.
Example
# Display the statistics of local RADIUS scheme.
<Quidway> display local-server statistics
The localserver packet statistics:
Receive: 0 Send: 0
Discard: 0 Receive Packet Error: 0
Auth Reveive: 0 Auth Send: 0
Acct Receive: 0 Acct Send: 0
2.2.5 display radius
Syntax
display radius [ radius-server-name ]
View
Any view
Parameter
radius-server-name: Specifies the RADIUS scheme name with a character string not
exceeding 32 characters. Display all RADIUS scheme when the parameter is not set.
Description
Use the display radius command to view the configuration information of all RADIUS
scheme or a specified one.
By default, This command outputs the configuration information about the specified or
all the RADIUS scheme.
Related command: radius scheme.
Example
# Display the configuration information of all the RADIUS scheme.