Huawei Quidway S8500 Series User Manual

Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 3 MPLS L2VPN Configuration Commands
Huawei Technologies Proprietary
3-9
3 2.2.2.2 up 131072/134137 LSP/14
VSI name : vpn4 , Service: VPLS , Service Status : Open
VC-ID Destination State Lcl-Label/Rmt-Label Tunnel/Index
4 2.2.2.2 up 132956/131076 LSP/14
VSI name : vpn5 , Service: VPLS , Service Status : Open
VC-ID Destination State Lcl-Label/Rmt-Label Tunnel/Index
5 2.2.2.2 up 131075/131080 LSP/14
VSI name : vpn6 , Service: VPLS , Service Status : Open
VC-ID Destination State Lcl-Label/Rmt-Label Tunnel/Index
6 2.2.2.2 up 131077/131083 LSP/14
VSI name : vpn7 , Service: VPLS , Service Status : Open
VC-ID Destination State Lcl-Label/Rmt-Label Tunnel/Index
7 2.2.2.2 up 131079/131086 LSP/14
3.2.2 mpls l2vc
Syntax
mpls l2vc ip-address vc-id
undo mpls l2vc
View
VLAN interface view
Parameter
ip-address: IP address of LSR-ID on the peer PE.
vc-id: ID of the VC, ranging from 1 to 4,294,967,295.
Description
Use the mpls l2vc command to create a Martini MPLS L2VPN virtual connection.
Use the undo mpls l2vc command to remove a Martini MPLS L2VPN virtual
connection.
You need to enable MPLS L2VPN before using the command.
Related command: mpls l2vpn, display mpls l2vc.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English