Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-2
2.1.2 display qos conform-level
Syntax
display qos conform-level [ conform-level-value ] { dscp-policed-service-map
[ dscp-list ] | exp-policed-service-map | local-precedence-cos-map }
View
Any view
Parameter
conform-level-value: Conform level, in the range of 0 to 2. If you type value(s) for this
parameter, then only the specified conform-level DSCP items will be displayed.
Otherwise, the system displays the whole mapping connection.
dscp-policed-service-map [ dscp-list ]: Displays “DSCP + Conform-level — >
Service-parameter” mapping table. dscp-list: DSCP value, which can be a single value
or values, for example, you can type single DSCP value “46”, or DSCP values “0 8 10
16” (a space is required between two values). If you type value(s) for this parameter,
then only the specified DSCP items will be displayed. Otherwise, the system displays
the whole mapping connection. DSCP value is in the range of 0 to 63.
exp-policed-service-map: Displays “EXP + Conform-level —> Service-parameter”
mapping table. EXP is MPLS priority of MPLS packets.
local-precedence-cos-map: Displays ”Local-precedence + Conform-level — >
Priority” mapping table
Description
Use the display qos conform-level command to view the “DSCP + Conform-level —>
Service-parameter” mapping table, “EXP + Conform-level — > Service-parameter”
mapping table and “Local-precedence + Conform-level —> Priority” mapping table.
Example
# Display the “DSCP + Conform-level —> Service-parameter” mapping table.
<Quidway> display qos conform-level 0 dscp-policed-service-map
Conform-level 0 :
Dscp-policed-service Map :
dscp : dscp exp cos local-precedence drop-precedence
--------------------------------------------------------------------------
0 : 0 0 0 0 0
8 : 8 1 1 1 0
10 : 10 1 1 1 0
16 : 16 2 2 2 0
18 : 18 2 2 2 0
To Next Page
Loading...
Need help?
General