Huawei Quidway S8500 Series User Manual

Command Manual – Integrated Management
Quidway S8500 Series Routing Switches Chapter 1
HGMP V1 Configuration Commands
Huawei Technologies Proprietary
1-39
2 01-80-c2-00-00-21 0 0
3 01-80-c2-00-00-22 1 1
4 ff-ff-ff-ff-ff-ff 1 1
5 01-00-0c-cc-cc-cc 1 1
========================Some Explain===============================
1 PortMask Val:Mask of the Multicast Group,if include the port, set this bit
1,
or not 0
2 McType Val:0-No Trans to cpu,1-trans to CPU,2-IGMP trans to CPU
3 Total Number of the addrtable : 6
================================End=================================
Table 1-11 Description on the fields of the query multiaddr command
Field Description
Index Multicast group number
Mac-addr Multicast address
PortMask
Port mask, which indicates the ports in a multicast group. For example,
value of 0 indicates the multicast group contains no port; value of 10
indicates the multicast group contains port 2; value of 110 indicates the
multicast group contains ports 2 and 3; value of 10101 indicates the
multicast group contains ports 1, 3 and 5; and so on.
McType
Indicates how a multicast group forwards data to CPU. The meanings
of its value are:
z 0: Do not forward to CPU
z 1: Forward to CPU
z 2: Forward IGMP packets to the CPU
1.3.16 query port lockstate
Syntax
query port lockstate
View
lanswitch view
Parameter
None.
Description
Use the query port lockstate command to query the lock state of the port of the
switch.

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English