Huawei Quidway S8500 Series - Chapter 2 Qos Commands; Qos Commands; Display Mirroring-Group

Command Manual – QoS/ACL
Quidway S8500 Series Routing Switches Chapter 2 QoS Commands
Huawei Technologies Proprietary
2-1
Chapter 2 QoS Commands
Caution:
z The syntax of the QoS/ACL command used for service processor cards
(LSB1NATB0 cards in the context of this document) is somewhat different from that
for interface cards. The command executeds in the VLAN view in this chapter are
commands for the service processor cards.
z Service processor cards do not support Layer 2 ACL.
2.1 QoS Commands
2.1.1 display mirroring-group
Syntax
display mirroring-group [ groupid ]
View
Any view
Parameter
groupid: mirroring group ID, in the range of 1 to 24.
Description
Use the display mirroring-group command to view the configuration of a port
mirroring group. The information displayed includes the monitored ports, direction of
monitored packets, monitoring ports, etc.
Related command: mirroring-group.
Example
# Display the parameter configuration of a port mirroring group.
<Quidway> display mirroring-group
mirroring-group 1 inbound Ethernet6/1/1 mirrored-to Ethernet6/1/2