Huawei Quidway S8500 Series User Manual

Command Manual – Network Protocol
Quidway S8500 Series Routing Switches Chapter 4 DHCP Configuration Commands
Huawei Technologies Proprietary
4-9
4.2.7 dhcp server ip-pool
Syntax
dhcp server ip-pool pool-name
undo dhcp server ip-pool pool-name
View
System view
Parameter
pool-name: Name of the address pool, a string that is of 1 to 64 characters in length. An
address pool name uniquely identifies an address pool.
Description
Use the dhcp server ip-pool command to create a global DHCP address pool and
enter the corresponding DHCP address pool view.
Use the undo dhcp server ip-pool command to remove a specified global DHCP
address pool.
No global DHCP address pool is created by default.
Related command: dhcp enable.
Example
# Create a global DHCP address pool with a name of 0.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-0]
4.2.8 dhcp server nbns-list
Syntax
In VLAN interface view:
dhcp server nbns-list ip-address [ ip-address ]
undo dhcp server nbns-list { ip-address | all }
In system view:
dhcp server nbns-list ip-address [ ip-address ] { interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }
undo dhcp server nbns-list { ip-address | all } { interface vlan-interface vlan-id [ to
vlan-interface vlan-id ] | all }

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English