Command Manual – MPLS
Quidway S8500 Series Routing Switches Chapter 2 BGP/MPLS VPN Configuration Commands
Huawei Technologies Proprietary
2-15
Example
# Define a filtering rule for receiving routing information: Only the routing information
matching the IP prefix ACL P1 can it be received by VPN.
[Quidway-bgp-af-vpn-instance] filter-policy ip-prefix p1 import
2.1.16 group
syntax
group group-name [ internal | external ]
undo group group-name
View
VPN-instance subaddress family view
Parameter
group-name: Name of a neighbor peer group. It can be expressed in string of letters
and numbers from 1 to 47 in length.
internal: Creates an internal peer group.
external: Creates an external peer group including other sub-AS groups in federation.
Description
Use the group command to create a BGP peer group in VPN-instance.
Use the undo group command to delete a specified BGP peer group.
By default, the MP-IBGP peer is created.
Members in one peer group must have the same routing export policy as the group
does, but can have different ingress policies.
Example
# Create an MP-EBGP peer group named test.
[Quidway-bgp-af-vpn-instance] group test external
2.1.17 if-match mpls-label
Syntax
if-match mpls-label
undo if-match mpls-label
View
Route-policy view
To Next Page
Loading...
