Command Manual – VLAN&QinQ
Quidway S8500 Series Routing Switches Chapter 4
Isolate-User-Vlan Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 Isolate-User-Vlan Configuration
Commands
4.1 isolate-user-vlan Configuration Commands
4.1.1 display isolate-user-vlan
Syntax
display isolate-user-vlan [ isolate-user-vlan-num ]
View
Any view
Parameter
isolate-user-vlan-num: VLAN ID of an isolate-user-VLAN.
Description
Use the display isolate-user-vlan command to view the mapping relationships
between isolate-user-VLANs and Secondary VLANs and the ports identifying the
mapping relationships between isolate-user-vlan and Secondary VLAN.
Related command: isolate-user-vlan enable, isolate-user-vlan.
Example
# Display the mapping relationships between isolate-user-VLANs and Secondary
VLANs.
[Quidway] display isolate-user-vlan
Isolate-user-VLAN VLAN ID : 5
Secondary VLAN ID : 3-4
VLAN ID: 5
VLAN Type: static
Isolate-user-VLAN type : isolate-user-VLAN
ARP proxy disabled.
Route Interface: not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged Ports: none
Untagged Ports: