Huawei Quidway S8500 Series User Manual

Command Manual – Port
Quidway S8500 Series Routing Switches Chapter 4 RPR Port Configuration Commands
Huawei Technologies Proprietary
4-7
Description
Use the display rpr defect command to view all RPR defects. The value 1 indicates
defects are found. The value 0 indicates there is no defect.
Example
#Query all RPR defects.
Rpr defects of the interface: RprPos2/1/1
Amount of reserved bandwidth exceeded defect: 0
Jumbo configuration defect: 0
LRTT measurement defect: 0
Maximum number of stations exceeded defect: 0
Miscabling defect: ringlet0: 0, ringlet1: 0
Protection mode configuration defect: 0
Inconsistent topology defect: 0
Topology instability defect: 0
IP address duplicate defect 0
Table 4-2 Description on the fields of the display rpr defect command
Field Description
Rpr defects of the interface RPR defects of the port
Amount of reserved bandwidth
exceeded defect
Reserved bandwidth exceeded
Jumbo configuration defect Jumbo configuration defect
LRTT measurement defect LRTT measurement defect
Maximum number of stations exceeded
defect
Defect of maximum number of nodes
exceeded
Miscabling defect Fiber misconnection defect
Protection mode configuration defect Protection mode configuration defect
Inconsistent topology defect Inconsistent topology defect
Topology instability defect Instable topology defect
IP address duplicate defect Duplicate IP address defect
4.1.5 display rpr fairness
Syntax
display rpr fairness [ rprpos interface-number ]

Huawei Quidway S8500 Series Specifications

General

Brand	Huawei
Model	Quidway S8500 Series
Category	Switch
Language	English