Huawei Quidway S8500 Series - Display Nat Server

Command Manual – NAT&URPF&VPLS
Quidway S8500 Series Routing Switches Chapter 1
NAT Configuration Commands
Huawei Technologies Proprietary
1-4
Parameter
None
Description
Use the display nat outbound command to display the information about all NAT
mapping entries configured by the nat outbound command.
Example
# Display the information about all NAT mapping entries configured by the nat
outbound command.
<Quidway> display nat outbound
NAT outbound information:
Vlan-interface2: acl(2000) --- NAT address-group(1)
[no-pat] slot:3
Vlan-interface2: acl( 2000) --- NAT address-group(0)
slot:3
Vlan-interface3: acl( 2000) --- NAT address-group(1)
[no-pat] slot:3
Vlan-interface3: acl( 2000) --- interface slot:3
1.1.5 display nat server
Syntax
display nat server
View
Any view
Parameter
None
Description
Use the display nat server command to display information about all the internal
servers.
Example
# Display information about all the internal servers.
<Quidway> display nat server
Server in private network information:
Interface GlobalAddr GlobalPort InsideAddr InsidePort Pro
Slot